Features and Benefits
· Advanced electronic controls
· Large high-pressure non-drip taps
· Drip tray included
· Interchangeable steam nozzles, slow for frothing milk and fast for instant boiling
· Low voltage switching on all controls
· No overflow required
· Powerful 14 psi operating pressure
Easy to install on a stable worktop
Designed for direct connection to a potable cold
water supply using the food quality hose supplied.
An isolating valve should be installed between the
supply and the heater. Rear supply connection.
To be connected to 230 volt supply with a suitable
break capacity of 13 amps or 30 amps.
Stainless steel case.
Stainless steel heating chamber.
Current regulations require all pressure vessels to be inspected annually by a competent person.
Boiler Test Certificates
Copy test certificates are available on reques
|Water Boiler Specification|
|Depth excluding drip tray (mm)||180|
|Heat-up time (mins)||50|
|Hourly Output (litres)||138|
|Power loading (kW)||3|
|Rapid Draw-Off (cups)||78|
|Rapid Draw-Off (litres)||13|
|Rear connection clearance (mm)||45|
|Recovery Rate (litres)||0.45|
Instanta WB2 Steam and Water BoilerX