Features and Benefits
· Self diagnostics system
· Long-life incoloy element
· Well insulated for minimal heat loss & energy use
· Stainless steel drip tray included
· Complete with 1.75 metres of cable & 13 amp plug
Easy to install on a stable worktop.
Designed for direct connection to a potable cold water supply using the 1.5 metre (3/4” BSP) hose supplied. An isolating valve should be installed between the supply and the heater. Rear supply connection and choice of rear or front overflow is available (rear option requires kit not supplied).
To be connected to 230 volt supply with a suitable break capacity.
Mirror finished stainless steel case.
Stainless steel heating chamber.
Low voltage switching.
Two safety cut-outs.
|Water Boiler Specification|
|Depth excluding drip tray (mm)||345|
|Heat-up time (mins)||16|
|Hourly Output (cups)||162|
|Hourly Output (litres)||27|
|Power loading (kW)||3|
|Rapid Draw-Off (cups)||30|
|Rapid Draw-Off (litres)||5|
|Rear connection clearance (mm)||50|
|Recovery Rate (litres)||0.5|
|Stand by Power (kW/h)||0.066|
|Tap clearance to drip tray (mm)||150|
Instanta 1000C Water BoilerX